OUR MOST PRECISE APPLICATION METHOD

The LEO Scalp Roller is designed to apply your treatment directly to the scalp, not the hair.

When used correctly, it helps:

• Deliver treatment evenly across the entire scalp

• Apply treatment directly where it is needed

• Reduce product being absorbed by the hair instead of the scalp

• Support more consistent scalp coverage

The Scalp Roller takes time.

A full 1ml application usually takes around 4 minutes.

If you want the fastest method, use the spray.

If you want the simplest manual method, use the dropper.

If you want the most precise direct-to-scalp method, use the Scalp Roller.

The best applicator is the one you will use consistently.

BEFORE YOU START

STEP 1: ATTACH THE SUCTION TUBE

The suction tube is supplied separately in the box.

Push the suction tube firmly onto the bottom of the Scalp Roller before first use.

The applicator will not function correctly without the suction tube attached.

STEP 2: ATTACH TO YOUR BOTTLE

Remove the cap from your LEO treatment bottle.

Screw the Scalp Roller firmly onto the bottle.

PRIMING THE APPLICATOR

STEP 3: FILL THE CHAMBER

Keep the bottle UPRIGHT.

Do not turn the bottle upside down when filling the applicator.

Pump the applicator until the liquid reaches the 2ml mark in the viewing window.

IMPORTANT:

Always fill the chamber to 2ml, even though each application uses only 1ml.

Starting at 2ml allows you to clearly see when exactly 1ml has been dispensed during application.

The Scalp Roller is designed to fill while upright.

It will not fill correctly if you attempt to pump it upside down.

APPLYING YOUR TREATMENT

STEP 4: TURN THE APPLICATOR UPSIDE DOWN

Once the chamber reaches the 2ml mark, turn the bottle upside down.

Place the roller tips directly onto your scalp.

Apply only light pressure.

The treatment should begin flowing through the roller tips as you move across the scalp.

STEP 5: TREAT THE ENTIRE SCALP

For best results, apply treatment evenly across the entire scalp.

Hair thinning often develops gradually and may not always be visible.

Comprehensive scalp coverage helps ensure treatment reaches all areas of the scalp, including:

• Hairline

• Temples

• Front scalp

• Mid-scalp

• Crown

• Surrounding areas

STEP 6: USE GRAVITY

The Scalp Roller works best when the roller tips are pointing downwards.

When treating the sides of your scalp, temples or hairline, tilt your head so the applicator remains pointed towards the floor.

This helps maintain consistent liquid flow throughout the application.

If the applicator is not facing downwards, liquid flow may be reduced.

HOW MUCH SHOULD I USE?

Use approximately 1ml per application.

Apply twice daily unless advised otherwise by your clinician.

A typical application takes approximately 4 minutes.

The viewing window allows you to monitor exactly how much treatment has been dispensed.

Start at the 2ml mark and finish at the 1ml mark.

CLEANING YOUR SCALP ROLLER

After every use, rinse the roller head under warm water.

Regularly unscrew and clean the roller assembly to prevent residue build-up.

Allow all parts to dry before reassembly.

Keeping the applicator clean will help maintain consistent performance.

If you have any more questions, reach out to us at hello@leo.hair.